fbpx
October 26
Don't miss on anything
Conference Program

10:00

OPENING CEREMONY
Introduction / Dr. Serhiy Schwab

10:00

OPENING CEREMONY
Welcoming words / Academician of the NAS of Ukraine Prof. Ihor Krivtsun

10:30

ADDITIVE MANUFACTURING, SURFACING AND CUTTING
Chair: Alina Vaschuk, Serhiy Schwab

A CONTRIBUTION TO THE HEAT MANAGEMENT IN WIRE ARC ADDITIVE MANUFACTURING WITH GAS FLOW BASED COOLING STRATEGIES
Philipp Gröninger, SLV Halle GmbH (Halle, DE)

COMPARISON OF CARBON STEEL FILLER MATERIALS FOR WIRE AND ARC ADDITIVE MANUFACTURING (WAAM) APPLICATION: AN EVALUATION BASED ON FINANCIAL, OPERATIONAL AND MECHANICAL PROPERTIES
Rafael Gomes Nunes Silva, Belgian Welding Institute (Gent, BE)

The efficiency induction surfacing of metal discs
Volodymyr Havryliuk, Ternopil Ivan Puluj National Technical University (Ternopil, UA)

FUNCTIONAL POLYMER COMPOSITES FOR FDM 3D PRINTING
Olha Masiuchok, E.O. Paton Electric Welding Institute, NAS of Ukraine (Kyiv, UA)

CORRELATION BETWEEN ARC MODE AND MICROSTRUCTURE DURING WIRE ARC ADDITIVE MANUFACTURING OF TITANIUM ALLOYS
Roman Selin, E.O. Paton Electric Welding Institute, NAS of Ukraine (Kyiv, UA)

11:30

INNOVATIVE TECHNOLOGIES AND PROCESSES OF METALLURGY
Chair: Liudmyla Lisova, Vitaliy Porokhonko

PRODUCTION OF FINECRYSTALLINE AL-BASED MASTER-ALLOYS BY USING ELECTRON-BEAM CASTING TECHNOLOGY
Mykhailo Voron, Physico-Technological Institute of Metals and Alloys, NAS of Ukraine (Kyiv, UA)

OBTAINING THIN-WALLED TITANIUM CASTINGS IN CERAMIC MOLDS UNDER CONDITIONS OF ELECTRON BEAM TECHNOLOGY
Pavlo Kaliuzhnyi, Physico-Technological Institute of Metals and Alloys, NAS of Ukraine (Kyiv, UA)

ELECTROSLAG REMELTING (ESR) WITH PORTION INGOT FORMATION
Vitalii Porokhonko, E.O. Paton Electric Welding Institute, NAS of Ukraine (Kyiv, UA)

RESEARCH OF GRANULOMETRIC COMPOSITION AND SPEED OF MOTION OF DISPERSED PARTICLES OF ZIRCONIUM WIRE DURING
Alexandr Khozhanov, D.Serikbayev East Kazakhstan State Technical University (Ust-Kamenogorsk, KZ)

12:30

FRACTURE AND FATIGUE BEHAVIOR OF WELDED COMPONENTS AND STRUCTURES
Chair:Marianna Dyman, Sviatoslav Motrunich

NEW FORMULAS TO DETERMINE STRESS CONCENTRATION FACTOR IN THE ROOT AREA OF BUTT-WELDED JOINT
Marianna Dyman, E.O. Paton Electric Welding Institute, NAS of Ukraine (Kyiv, UA)

HIGH CYCLIC FATIGUE BEHAVIOR UNDER CONSTANT AND VARIABLE AMPLITUDE LOADING OF 7XXX SERIES ALUMINUM ALLOYS JOINTS PRODUCED BY FLASH BUTT WELDING
Sviatoslav Motrunich, E.O. Paton Electric Welding Institute, NAS of Ukraine (Kyiv, UA)

14:00

ADVANCED WELDING AND JOINING TECHNOLOGIES
Chair: Serhiy Schwab, Roman Selin

Ernest Levert, Lockheed Martin (Dallas, USA)

RESEARCH OF THERMAL DEFORMATIONS AND METALLURGICAL PROCESSES, FEATURED BY FLASH-BUTT WELDING FORMATION OF JOINTS IN MODERN RAILWAY STEELS, WELDING TECHNOLOGY DEVELOPMENT AND IMPLEMENTATION
Bogdan Cherednychok, Igor Sikorsky Kyiv Polytechnic Institute / E.O. Paton Electric Welding Institute, NAS of Ukraine (Kyiv, UA)

WELDING-BRAZING CMT AND PLASMA ARC BRAZING OF THIN SHEET GALVANIZED STEEL WITH ALUMINUM SOLDERS
Vadim Strashko, Igor Sikorsky Kyiv Polytechnic Institute (Kyiv, UA)

THE EFFECT OF ELECTROMAGNETIC FIELDS ON FLAT STEEL BILLET IN CASTING TECHNOLOGIES OF RECEIVING TWO- AND THREE- LAYER PRODUCTS
Andriy Tymoshenko, Physico-Technological Institute of Metals and Alloys, NAS of Ukraine (Kyiv, UA)

ELETRIC ARC AND PLASMA ARC BRAZING OF THIN SHEET GALVANIZED STEEL
Vitaliy Polischuk, Igor Sikorsky Kyiv Polytechnic Institute (Kyiv, UA)

HIGH STRENGTH PRECIPITATION HARDENABLE NICKEL ALLOYS - WELDABILITY AND METALLURGICAL CHALLENGES
Hitesh Narsia, Godrej Aerospace (Mumbai, IN)

A USER’S GUIDE: PHYSICAL COMPARISON OF THE BEAM ABSORPTION BETWEEN FIBER AND DIODE LASERS USING CALORIMETRY
Amadeus Aurin, SLV Halle GmbH (Halle, DE)

ACTUALITY OF DEVELOPMENT OF UNDERWATER WELDING TECHNOLOGY OF HIGH-ALLOY CORROSION-RESISTANT STEELS IN SALT WATER
Mykola Kakhovskyi, E.O. Paton Electric Welding Institute, NAS of Ukraine (Kyiv, UA)

TIG WELDING OF COPPER TIRES WITH COLLECTOR PLATES MOTOR ARMATURE
Taras Maydanchuk, E.O. Paton Electric Welding Institute, NAS of Ukraine (Kyiv, UA)

CHEMICAL WELDING OF NOVEL EPOXY/GRAPHENE OXIDE COMPOSITES
Alina Vashchuk, E.O. Paton Electric Welding Institute, NAS of Ukraine (Kyiv, UA)

IMPROVEMENT OF HEATING ELEMENTS EFFICIENCY FOR RESISTANCE WELDING OF THERMOPLASTICS
Roman Kolisnyk, E.O. Paton Electric Welding Institute, NAS of Ukraine (Kyiv, UA)

17:15

NEW STRUCTURAL AND FUNCTIONAL MATERIALS, NANOMATERIALS, COMPOSITES
Chair: Maksym Khokhlov, Taras Maidanchuk

ELECTRICALLY CONDUCTIVE POLYMER COMPOSITES WITH CONTROLLED MORPHOLOGY
Oleksii Maruzhenko, E.O. Paton Electric Welding Institute, NAS of Ukraine (Kyiv, UA)

INFLUENCE OF COPPER CONTENT IN HIGH-ENTROPY ALLOYS CO- CR-FE-NI-CU SYSTEM ON THEM DISSIPATIVE PROPERTIES
Oleksandr Kremenchutskyi, E.O. Paton Electric Welding Institute, NAS of Ukraine (Kyiv, UA)

CHANGING OF THE PROPERTIES OF CARBON NANOTUBES UNDER EXTERNAL INFLUENCE
Halina Mykhailova, G. V. Kurdyumov Institute for Metal Physics of the N.A.S. of Ukraine (Kyiv, UA)

ANALYSIS OF GA DOPING EFFECT ON MG-AL AND MG-CD ALLOYS BY MICROINDENTATION
Maksym Khokhlov, E.O. Paton Electric Welding Institute, NAS of Ukraine (Kyiv, UA)

18:45

NUMERICAL SIMULATION AND MODELLING OF PROCESSES AND MATERIAL
Chair: Roman Selin, Sviatoslav Motrunich

DEVELOPMENT OF A MATHEMATICAL MODEL FOR PREDICTION RESIDUAL STRESSES AND STRAINS AT FSW
Bohdan Tsaryk, E.O. Paton Electric Welding Institute, NAS of Ukraine (Kyiv, UA)

COLLISION DETECTION OF SPHERICAL PARTICLES ON GENERAL QUADRATIC SURFACE AS A LOW-COST COMPUTATIONAL ALTERNATIVE FOR REAL TIME SIMULATIONS
Gustavo Domínguez-Rodríguez, Universidad Autónoma de Campeche, Centro de Investigación en Corrosión (Campeche, MX)

18:45

CLOSING CEREMONY
organization
[CREW]
ORGANIZATION COMMITTEE
international
[COOMMITTEE]
INTERNATIONAL STEERING COMMITTEE
information
[PARTNERS]
INFORMATIONAL PARTNERS

Automatic Welding Journal

Electrometallurgy Today

Casting processes

Metal and casting of Ukraine